Printer L130 Can Not Printing After Add Balck Ink

The reason is that the ink cartridge used by the printer is a memory chip, able to estimate the printer's print volume and write such as the chip ink residual, when adding ink to the cartridge, but did not clear the chip's memory fog, that the cartridge even if physically full of ink, the printer should be read in accordance with the chip's previous records, which is 0, meaning that the cartridge is empty, the printer will report an error message and stop working.

When adding ink, it is best to choose the same brand of ink, different brands of ink Hp ink bottle replacement may sometimes react and cause precipitation. Blocked printhead. If the printhead is really clogged, you can first use the printer itself "cleaning" function. If you can not, you can remove the cartridge and clean it with pure water. But be careful. Do not damage the circuit board.

In addition, when adding ink, it is best not to wait until the printer is completely out of ink and then add, it should be found that the ink is almost exhausted, then add ink.
To clean the printhead, hp ink cartridge 65 select Settings, Printers, right-click the printer, select Printer Preferences, select Application Tools, select the printhead cleaning, a failure to the second.
This is the phenomenon of print head clogging, the implementation of the printer driver in the printhead cleaning program, you can clear the printhead, generally three to five cleaning, depending on the length of time clogging the number of times there will be changes in the cleaning and printing after the test page you can see whether the printhead is smooth. After cleaning three times to let the printer rest for a while to prevent damage to the motherboard overheating. Really can not, put the cartridge in warm water (warm water just no nozzle), with ultrasonic cleaning.
It is also possible that there is air inside the cartridge, if you use the print program to clean the printhead a few times does not work, then put it for a while and then use it again.