Push the front paper exit tray into the printer's body, then remove the paper feed frame. Use transparent tape to attach the transparent top cover to the white chassis. Peel off the blue adhesive tape at the joint where the top case meets the blue base, revealing the seams.
With a small, flat-head screwdriver, gently pry open the two internal button clips located on the printer's back, exposing a seam.
Carefully slide the screwdriver along this seam towards the front of the printer. You will encounter four more internal button clips-two on each side and one at the front. Open these clips in the same manner. Once all clips are released, the printer's cover and base will easily separate.
To access the paper feeding mechanism, pinch the movable paper guide at the feeding mouth, slide it to the left until it reaches the notch, and then lift up the upper cover. This process completes the disassembly of the printer.
Please ensure that the steps described are safe and appropriate for your specific printer model before attempting any disassembly.
