The dye colorant in the dye ink is completely dissolved in the ink in a single molecular way, and its colorant particles are small and easy to dissolve in water or other chemical solvents. Such structure makes it difficult for the dye ink to block the nozzle. Even if it is clogged, it is relatively simple to dredge the nozzle. However, the dye colorant of dye ink has a large number of hydrophilic particles and is easy to dissolve. In this way, once the printed manuscript encounters water, the colorant previously fixed on the medium will be dissolved again and spread around with the flow of water, causing serious halo. This is the main reason for the poor waterproof performance of dye ink. At the same time, the colorant of the dye ink is directly exposed to the air. Under the action of light and ozone, the chemical chain of the dye colorant may break, causing discoloration of the colorant and other phenomena, fading the printed manuscript, thus affecting its preservation performance.
The structure of pigment ink is the same, and the colorant is some small solid particles. In order to make these solid colorants evenly distributed in the ink, emulsifier shall be added to make the colorant wrapped with a special resin component. With the help of a small amount of hydrophilic particles on the resin layer, the ink shall be emulsified, and the colorant shall be suspended in the ink. Since the colorant is not soluble in water, when the print meets water, the colorant does not migrate with water, and its water resistance is naturally greatly improved. The colorant of pigment ink is generally a highly crushed mineral, and its own stability is very good. In addition, the outer layer of the colorant is wrapped with a resin layer. When encountering sunlight and ozone, the first thing to destroy is the outer resin layer, and the internal colorant is not affected, so it is not easy to fade.





